Pagani Zonda R Clubsport full cell concept sport car

Pagani Zonda R Clubsport full cell concept sport car

The Pagani Zonda R Clubsport - 220 mph (354 km/h) is very unique in its own right but has some tail, tail, signs of other super cars on this page, see if you can spot them. This is a very, very rapidly fast car

The central carbon chassis incorporates a roll cage and a rubber racing fuel cell with 4 fuel pumps and quick refuel filler cap, similar to GT race cars. The wheelbase has been increased by 47 mm (1.9 in) to increase stability. The front and rear subframes are brand-new, built to accommodate new suspension geometry, and produced in Avional. The slick-shod wheels are new forged-magnesium centre-lock models, which in conjunction with on-board pneumatic airjacks (again, like the FXX) allow rapid change of the entire wheel assemblies.

The car senses, displays and logs information about the amount of downforce that is generated at each wheel at all times. It is thought that this system will enable owners to adjust set-up ccording to track conditions and to improve their cornering technique.
Bodywork In addition to the wheelbase increase (47 mm), overall length has increased by 394 mm (15.5 in) and track by 50 mm (2 in). The bodywork and aerodynamics have been altered to offer maximum downforce, featuring a longer front bonnet with flaps, a closed underbody and a new rear overhang with adjustable rear wing and race-derived diffuser. These are intended to translate into increased aerodynamic efficiency and downforce for maximum cornering speed. It is also noted that the car's new rear bodywork is minimal in the extreme, being composed mostly of vent. This is thought to be symptomatic of the need to keep the engine cool enough, even under hard track use. Again, this is similar to the gutted bodywork of the Ferrari Evoluzione.
Engine Output has increased to 750 bhp (559 kW) at 8000 rpm and 523 lb·ft (709 N·m) of torque. A lightweight carbon fibre high performance intake system, racing multiple disc sintered clutch and Formula 1-style exhaust system, hydroformed in Inconel 625 and ceramic coated for optimal heat dissipation, have been added. The engine is combined with a 6-speed transverse-mounted manual sequential synchronized gearb
Interior The car's interior is spartan reflecting the car's racetrack aspirations and intended home, and features bespoke seats, customized to the driver to offer maximum support. As before, the Digitek instrumentation provides essential information and the sophisticated telemetry allows a variety of sensors to monitor numerous aspects of the car.

Pagani Zonda R picks up the pieces

Horacio Pagani's cars not only seem to go from strength to strength, they go from "Awesome" to "I didn't know it could be that awesome." The Pagani Zonda R is the latest in "Wow!", a 2,425-pound, 750 horsepower carbon-fiber dagger right into the heart of Italy's exotica establishment. Supercar Movies has 'pieced together' a proper trailer for it, and it is as gorgeous as the car.

Pagani bringing "hybrid" Zonda F Cinque

The Pagani Zonda F Cinque seen here isn't a hybrid as in "green," it's a hybrid of the Pagani F and the Pagani Cinque. The car, slated to star at the Geneva Auto Show, is a one-of-a-kind Pagani simply meant to hold a place in our hearts while we wait for the Pagani Cinque to arrive next year.

The car hasn't been finished yet, but the Zonda F Cinque is essentially a Zonda F in Cinque colors. That means you'll miss the roof intake and lower aero modifications of the Cinque, but you'll get the carbon fiber and silver exterior treatment, and the spoked mags with red accents. That isn't much different than a decal package, but this is a Pagani and there will only be one of them, which means we still look forward to bringing it to you next week from Geneva.

[Source: GT Spirit via World Car Fans]

Pagani Zonda R on the Monza circuit

Last week we saw images on the track of the 750 hp Zonda R. Now is time to see the full video from that session with the track-only car at the Monza race track in Italy.

Pagani's R-rated swansong debuts

While the closest that most of us will ever get to driving one of Horatio Pagani's creations will be via a Playstation or xBox controller, that doesn't mean we didn't nearly puddle ourselves at the mere sight of the new Zonda R. As we somehow missed out on an invitation when the car debuted in Vienna a few weeks ago, we are nonetheless happy to bring you these first official photos.

Although the Zonda R's sexy self is a sendoff for the current model range, the exoticmaker reports that the car is in fact 90% new. Built using a spendy carbon-fiber/titanium mix (reportedly an industry first) and being at once longer, wider and lower than the Zonda F, the R figures to have real presence to go along with its 739-horsepower 6.0-liter V12 engine. Zonda says the supercar was inspired by Group C racers, and street legality was not a consideration.

Thanks in part to its light weight (1,070 kilograms, or about 2,360 pounds) and Pagani's first-ever paddleshift gearbox, the rear-drive R will launch to 60 mph in three seconds dead and run up to a 233 mph top speed, provided Sir has paid the help to make sure the adjustable aero bits are properly tweaked.

A total of 16 Zonda Rs are planned, with 15 being offered to the public (the 'extra' model will stay in company hands) at a tidy €1.4M – about $1.8 million Yankee bucks. That's a shedload of cash to be sure, but given that the carbon-titanium work alone is said to have cost more than four times that of the Zonda F, it might actually be a small bargain.

[Source: iMotor]

Pagani Zonda R officially unveiled in Vienna

The Pagani Zonda did something incredible. It proved that the supercar world did not revolve around Ferrari and Lamborghini. So to commemorate Horacio Pagani's achievement, the hypercarmaker has created one last version of the Zonda before its replacement arrives next year.

After 24 months of development, and at the urging of an unnamed Italo-American customer that already owns three Zondas, the Pagani Zonda R was created as a lightweight, track-only variant of the iconic coupe. Production is limited to ten examples with a price tag of 1.4-million euro.

Although the carbon fiber exterior is deceiving, the Pagani Zonda R only carries over 10% of its structure from its predecessors. The wheelbase has grown by 47mm, the overall length is 394mm longer and the track has been widened by 50mm. An all-new carbon fiber monocoque resides underneath the wind-tunnel tested body, along with a forged aluminum suspension, new six-speed sequential gearbox and four aero-spec fuel pumps that feed a Mercedes-Benz AMG-sourced 6.0-liter V12. Pagani claims the new heart – nestled into the 2,425-pound R – will produce 750 hp at 8,000 rpm and 524 lb-ft of torque, for a 0-60 time of 3.2 seconds and a top speed of 248.54 mph. Air is fed into the bent-twelve through a carbon fiber air intake system, while an Inconel manifold and "F1-style" exhaust releases spent hydrocarbons and keeps engine temps in check.

Pagani makes it clear that the Zonda R is a not street legal, and one owner is taking that to the illogical extreme. One of the first Zonda Rs to be delivered will be installed in the customer's living room and fitted

[Source: Pagani]

Pagani releases more renderings of the Zonda R

The Pagani Zonda is on its way to supercar heaven, due to be replaced by Horacio Pagani's next masterpiece, currently code-named the C9. To send off the current Zonda in style, Pagani is working on the Zonda R, limiting production to ten examples with a price tag of €2,000,000.

Despite looking very similar to the Zonda F and its predecessors, the R only shares ten percent of the outgoing model's underpinnings, and instead, gets a sleek new shape that's 47mm longer, providing even more downforce through the use of a longer splitter, rear defuser and wing.

Pagani has released four new renderings of its all-carbon fiber coupe, and according to Autoblog.it (no relation), Pagani won't be using the 750-hp, 7.3-liter Mercedes mill, instead opting for the 6.0-liter AMG V12 putting out similar hp and torque. Five road-going versions are planned, while the remaining five will be limited to circuit duty. We're hoping to finally see the Zonda R in person sometime next year, likely at the 2009 Geneva Motor Show.

[Source: Autoblog.it]

Pagani Zonda F - new spy shot

A spy photographer caught the future Zonda F testing. The car will keep a similar body to the design launched 10 years ago, but will add a wider grille, sleeker looking headlights, revised rear end, and a new engine air scoop.

Under the hood the engine will likely be borrowed from the SL65 AMG Black Series. In the Zonda, the 6.0-liter V12 should deliver 661bhp and over 700 ft lbs of torque. The 0 to 60 mph sprint will be made in under 3.6 seconds. The engine will be mated to the same six-speed Cima sequential gearbox found in the Zonda Cinque. Prices should be around £400,000 (about $800,000).

Pagani to make five street legal versions of the Zonda R

Back in February, we opined the fact that the production Pagani Zonda R, a track-only carbon fiber supercar powered by a 750-horsepower V12 to go along with its 1.2 million euro price tag, didn't make the trek to Geneva. It seemed at the time that there just weren't enough orders for the vehicle for Pagani to be able to offer it. That issue could soon be rectified, if rumors floating around on the Teamspead forums prove accurate. It seems that five roadgoing versions of the Zonda R will be created, known as the Zonda Cinque, which, appropriately enough, means five in Italian. Could this version of the Zonda be what we've seen testing in spy shots these last few months? It's hard to say for certain, but we do detect the pairs of triple headlights on both the spied cars and the supposed image above of the Cinque. Draw your own conclusions, but we think there is always room for another carbon fiber supercar in our dream garages.

Next Pagani Zonda packing big engine, bigger intakes

Spies have caught a Pagani Zonda mule during a brief respite from testing and at first glance, not much has changed. The greenhouse looks similar to the current version, while the front end benefits from a revised splitter and a softening of the previous model's hard creases. While these changes are minimal at best, it's not until you scope out the massive air intakes above the rear fenders that you realize that big things are afoot. Those new inlets are rumored to feed a supercharged version of an AMG-sourced 5.4-liter V8 – the same 680-hp mill that powers the McLaren SLR. Partnered with Pagani's extensive use of carbon fiber and other lightweight components, there's little doubt that the new Zonda will crack the three-second mark to 60 and continue on to a top speed of well over 200 mph. No production dates are available yet, but expect the new model to debut sometime next year.

Pagani C9

Pagani is preparing to launch a new model. Internally known as the "C9", the supercar is designed for the USA and the Japanese markets and will go on sale in late 2009, after its official debut at the Geneva Motor Show next year.

Pagani will continue its cooperation with AMG, but this time the model will not be powered by the 7,3-liter V12 engine. Instead the C9 will be powered by either a 6,2-liter V8 or a 6,0-liter V12 biturbo engine.

As you already know Pagani will increase production from the current 16 units a year to 60 units a year, so you might be a bit more lucky if you want to drive a Pagani next year!

Pagani Zonda R

While we certainly cannot say the Zonda F lacks performance figures, driving around the Nürburgring in 7:32 and achieving lateral G forces of almost 1.5 G, it is however a road car, easy to drive, intuitive and setting the benchmark for comfort, safety and lightweight. Paired with a quality finish and the attention to detail this made the Zonda F one of the most desirable supercars resulting in the 25 Coupé models being sold out in record time.

This did not seem to fulfil the requirements of our most demanding customers, who adore the weekend drive on a racetrack.


The spark has been set by an Italo-American customer, enthusiast and already proud owner of 3 Zondas. He describes the project this way: "The thought has been on my mind for quite some time, but I am not interested in racing".

The Zonda R is born with full liberty. The target: the ultimate performance at the racetrack without any implications of rules, except for safety, where no compromise is allowed. In September 2006 the first drawings were ready, but it was crucial to have the support of Mercedes-AMG for a high revving engine with a power output of 750hp, dry sump, light and
with a low centre of gravity. The basis was the self supporting engine of the mighty CLK GTR, which has dominated the GT championships.

Eve at constant racing pace the engine would have to cover over 5.000 km before servicing. The challenge has been accepted without hesitation.

The Zonda R is a car designed from scratch, with only 10% of the Zonda F components to be carried over. The suspension forged in Avional, a new Pagani six speed transversal sequential gearbox, carbon fibre monocoque, aeronautical four pump fuel tank are only part of the equation.


The wheelbase has grown by 47mm, the overall length by 394 mm and the track is increased by 50mm. The bodywork and aerodynamics have been studied to offer maximum downforce. Even though built for the track, the project would not have received kick off, if the quality and finish of the car and its details was not up to the level of the Pagani road cars.

One of the first cars to be delivered however will be kept in a living room, designed by Pagani and built with the same materials as the Zonda F, beautifully textured carbon fibre, avional, titanium, inconel and other state of the art materials. Additionally it will feature a bespoke HiFi System that will allow the customer to listen to the sound of this car at Le Mans and the Nürburgring.

The Pagani customers who have ordered the Zonda R will be relieved of almost 1.2 million + taxes.


This Zonda is purpose made for track use, without restrictions of any competition rules or homologation, with the only exclusion of the passengers’ integrity, where no compromise is tolerated according to our philosophy and state-of-the-art safety measures are featured.

A new heart
The engine is built by the racing specialists at Mercedes AMG, where the championship winning DTM cars are born, as well as the CLK GTR, probably the most devastating and effective weapon ever to compete in the GT series. From it’s engine the Zonda R borrows the basic architecture including an ingenious dry sump allowing a low centre of gravity. This self-supporting engine with 750 hp at 8000 rpm and 710 Nm of torque carries a lightweight carbon fibre highperformance intake system, a racing multiple disc sintered clutch and Formula 1 style exhaust system, hydroformed in Inconel 625 and ceramic coated for optimal heat dissipation. The power unit combined with a 6 speed transversal manual sequential synchronised gearbox is designed to satisfy the most ambitious drivers.

The chassis
The central carbon chassis will incorporate a roll cage and a rubber racing fuel tank with 4 fuel pumps and quick refuel filler like on GT race cars. The wheelbase has been increased by 47mm to offer the best stability. The front and rear subframes are brand-new, built to accommodate a new suspension geometry, produced in avional. The magnesium forged rims with central wheel nut and a quick pneumatic lifting system allows fast and effortless changes of the slick tyres.


Bodywork and aerodynamics
The new bodywork has been honed to offer elevated downforce even in low speed corners. The longer front bonnet with flaps, closed underbody and the rear overhang with the adjustable rear wing and race derived diffusor translate into shattering aerodynamic efficiency and will let you experience cornering speeds beyond imagination.

The car displays and logs information about the amount of dowforce that the car is generating at each moment. Combined with the adjustable wings you can easily find the best setup for each track.

Workstation
The interior is designed to accommodate the driver and passenger in bespoke seats, built to offer the best support, when the G-forces from the vehicle dynamics come into question. The Digitek instrumentation provides the essential information and a sophisticated telemetry allows through a variety of sensors to monitor every single component of the car.